Skip to main content
- IPTV setup guide · Set up IPTVOID on your screen
IPTV Setup Guide: Firestick, Smart TV & Mobile
- 15 devices covered
- Free and paid apps marked
- Numbered steps for every app
Set up in three steps
Get your login
Install an app
Enter the details and watch
Your three IPTVOID login details
Username
Password
Server URL
Choose your device
Fire TV / Firestick setup guide
First: install Downloader on Fire OS
Install Downloader
From Fire TV Home, open Find / Search. Search for Downloader, select the app by AFTVnews, then choose Get / Download.
Allow Downloader to install apps
Open Settings → My Fire TV → Developer Options → Install Unknown Apps. Then allow Downloader to install the player. Older Fire OS versions may call this “Apps from Unknown Sources”. You do not need ADB debugging.
Developer Options missing?
Open My Fire TV → About and select your device name seven times. Then press Back and open Developer Options.
Enter the address or code
Open Downloader. Then enter the verified download address or the code stated in the app guide below, choose Go, and check that the destination identifies the intended player. Choose Install, then Open.
Tidy up
Afterwards, you can turn off Downloader’s install permission. If your device does not offer these settings, check whether it uses Vega OS; do not keep repeating the Fire OS steps.
TiviMate setup guide Recommended Free · paid upgrade
What you need: An Android TV / Google TV or compatible Fire OS device, as well as the connection details supplied by IPTVOID.
Install TiviMate
On a compatible Fire OS device, use the Downloader instructions above, then enter
272483ortivimate.com/apk. These are listed on the TiviMate publisher’s website. Check the app name before installing.Add a playlist
Open TiviMate, then start adding a playlist. Afterwards, choose the connection type in your activation message: Xtream Codes, M3U or a provider-registered Stalker portal.
Match the fields to your connection type
For Xtream Codes only:
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
M3U: paste the full supplied playlist URL into the playlist field. Portal: enter only the portal URL supplied after IPTVOID registers the device/app ID. Do not guess a portal address from an ordinary server URL.
Finish the playlist prompts
Follow the app’s on-screen prompts to finish, then wait for the channel list. If IPTVOID supplied a separate EPG URL, add it as the programme-guide source; it is not a second playlist.
Open the programme guide
Select your IPTVOID playlist and a live channel. Then use the player’s guide to browse programmes. Also, movie and series features depend on the player edition and the account supplied.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
IBO Player Pro setup guide Second option Paid
What you need: The app installed on your TV or box, as well as the IPTVOID connection details from your activation message.
Install IBO Player Pro
Open your device’s app store (Samsung Apps, LG Content Store or Google Play), then search for IBO Player Pro and install it if your model and region are supported. On Fire TV, use the Downloader steps in the Fire TV guide with the download address on the IBO Player Pro website. This is not the same app as IBO Player, because the two have separate websites and licences.
Find the MAC address and Device Key
Open IBO Player Pro and keep the screen showing the MAC address and Device Key open. In other words, they identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
In the app, or on the IBO Player Pro playlist page after entering the MAC address and Device Key, add a playlist: choose Xtream Codes for a username, password and server URL, or M3U for one complete link. Name it IPTVOID.
Reload the app
Back on the TV, choose Reload or close and reopen the app, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. The app is free to register; however, its activation (paid in the app to its developer) is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
DINO VIP Preset player
What you need: A Fire OS device with Downloader installed (see above), as well as the login details from your activation message.
Install DINO VIP
Use the Downloader instructions above. Then enter the code
8374888in Downloader and choose Go. Allow the download to finish, then choose Install → Open.Open the app and choose the login type
Open DINO VIP. If the app shows a preconfigured IPTVOID profile, select it, then choose Edit. Otherwise choose the option to add a user or playlist and pick Xtream Codes API.
Enter your account details
- Playlist / profile name
- IPTVOID, or another name you recognise.
- Username
- Your IPTV username from the activation message.
- Password
- Your IPTV password from the same message.
If the app asks for a server URL, use the exact address in your activation message; do not invent one.
Save and connect
Save or update the profile, then choose Connect or Login. Wait for your channel list to load; keep the app open while it loads.
Start watching
Choose the live-channel, movie or series section included in your account. If the login is refused, check the list below; use only server addresses supplied by IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Smarters Pro setup guide Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Use the Downloader steps above and follow the Firestick installation instructions on the official Smarters Pro website. Use the developer’s current link, not an advertisement or an unrelated similarly named app.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Samsung Smart TV setup guide
IBO Player Recommended Paid
What you need: The IBO Player app on your TV, a phone or computer for the IBO website, as well as your IPTVOID login details.
Install the correct IBO Player
On your Samsung TV, open Apps / the Samsung TV app store, search for IBO Player and install it if your model and region are supported. This guide is for the version that shows iboplayer.com inside the app.
Find the two codes on your screen
Open IBO Player, then keep the screen showing the MAC / Device ID and Device Key open. These identify this installation of the player; in other words, they are not your IPTVOID username and password.
Add your IPTV account from a phone or computer
Open the IBO Player manage-playlist portal. Enter the Device ID and Device Key shown on your TV, then log in. Choose Add XC Playlist if shown; XC means the username/password/server login.
Use the server address in your own activation message. If you were given an M3U link, use the portal’s M3U / playlist-URL option instead.
Save and refresh the TV app
Save the playlist on the website. Then return to the TV and choose Reload or Change Playlist if offered, or close and reopen IBO Player. Select the IPTVOID playlist you added.
Open your channels
Allow the playlist to load, then open the live-channel, movie or series section available for your account.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
IBO Player Pro setup guide Second option Paid
What you need: The app installed on your TV or box, as well as the IPTVOID connection details from your activation message.
Install IBO Player Pro
Open your device’s app store (Samsung Apps, LG Content Store or Google Play), then search for IBO Player Pro and install it if your model and region are supported. On Fire TV, use the Downloader steps in the Fire TV guide with the download address on the IBO Player Pro website. This is not the same app as IBO Player, because the two have separate websites and licences.
Find the MAC address and Device Key
Open IBO Player Pro and keep the screen showing the MAC address and Device Key open. In other words, they identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
In the app, or on the IBO Player Pro playlist page after entering the MAC address and Device Key, add a playlist: choose Xtream Codes for a username, password and server URL, or M3U for one complete link. Name it IPTVOID.
Reload the app
Back on the TV, choose Reload or close and reopen the app, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. The app is free to register; however, its activation (paid in the app to its developer) is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
ELK Player setup guide Paid
What you need: The ELK Player app, a phone or computer for the ELK website, as well as the complete M3U link from your activation message.
Install ELK Player
On a Samsung or LG TV, open the TV’s app store, then search for ELK Player and install it if your model and region are supported. On iPhone, iPad or Apple TV, open the ELK Player App Store listing and check the developer ELKPLAYER LTD.
Note the MAC address on screen
Open ELK Player. The first screen shows the app’s MAC address (some versions also show a device key). Keep that screen open, because these identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
On a phone or computer, open the ELK Player playlist page and enter the MAC address shown on your screen. Then name the playlist IPTVOID, paste the complete M3U link and choose Add List. The website takes an M3U playlist link.
Reload the app
Back on the TV or device, choose Reload or close and reopen ELK Player, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. ELK Player runs free for 7 days; after that its developer asks for a one-time activation fee per device, paid on the ELK website with your MAC address. That fee is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
iPhone / iPad setup guide
UHF setup guide Recommended Free · paid upgrade
What you need: An iPhone, iPad or Apple TV with the App Store, as well as the connection details from your activation message.
Install UHF
Open the UHF App Store listing and choose Get. Check the developer name Short Wavelength Applications SL. On Apple TV, install the same app from the tvOS App Store.
Add a playlist
Open UHF, then choose to add a playlist. Pick Xtream Codes if your activation message has a username, password and server URL; pick M3U if it has one complete playlist link. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
For M3U, paste the whole link into the playlist field. Do not split it into the fields above.
Save and let the list load
Save the playlist and wait for the channels and the guide to finish loading; keep the app open while it loads.
Start watching
Open the IPTVOID playlist, then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the guide can take a few minutes to fill the first time. UHF’s PRO plan is paid to its developer and is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
ELK Player setup guide Paid
What you need: The ELK Player app, a phone or computer for the ELK website, as well as the complete M3U link from your activation message.
Install ELK Player
On a Samsung or LG TV, open the TV’s app store, then search for ELK Player and install it if your model and region are supported. On iPhone, iPad or Apple TV, open the ELK Player App Store listing and check the developer ELKPLAYER LTD.
Note the MAC address on screen
Open ELK Player. The first screen shows the app’s MAC address (some versions also show a device key). Keep that screen open, because these identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
On a phone or computer, open the ELK Player playlist page and enter the MAC address shown on your screen. Then name the playlist IPTVOID, paste the complete M3U link and choose Add List. The website takes an M3U playlist link.
Reload the app
Back on the TV or device, choose Reload or close and reopen ELK Player, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. ELK Player runs free for 7 days; after that its developer asks for a one-time activation fee per device, paid on the ELK website with your MAC address. That fee is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Smarters Pro setup guide Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Open the Smarters Pro App Store listing and choose Get. Check the name Smarters Pro and developer Tech Smarters Private Limited. This link is not Smarters Player Lite.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
LG Smart TV setup guide
IBO Player Recommended Paid
What you need: The IBO Player app on your TV, a phone or computer for the IBO website, as well as your IPTVOID login details.
Install the correct IBO Player
On your LG TV, open the LG Content Store / Apps, search for IBO Player and install it if your model and region are supported. This guide is for the version that shows iboplayer.com inside the app.
Find the two codes on your screen
Open IBO Player, then keep the screen showing the MAC / Device ID and Device Key open. These identify this installation of the player; in other words, they are not your IPTVOID username and password.
Add your IPTV account from a phone or computer
Open the IBO Player manage-playlist portal. Enter the Device ID and Device Key shown on your TV, then log in. Choose Add XC Playlist if shown; XC means the username/password/server login.
Use the server address in your own activation message. If you were given an M3U link, use the portal’s M3U / playlist-URL option instead.
Save and refresh the TV app
Save the playlist on the website. Then return to the TV and choose Reload or Change Playlist if offered, or close and reopen IBO Player. Select the IPTVOID playlist you added.
Open your channels
Allow the playlist to load, then open the live-channel, movie or series section available for your account.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
IBO Player Pro setup guide Second option Paid
What you need: The app installed on your TV or box, as well as the IPTVOID connection details from your activation message.
Install IBO Player Pro
Open your device’s app store (Samsung Apps, LG Content Store or Google Play), then search for IBO Player Pro and install it if your model and region are supported. On Fire TV, use the Downloader steps in the Fire TV guide with the download address on the IBO Player Pro website. This is not the same app as IBO Player, because the two have separate websites and licences.
Find the MAC address and Device Key
Open IBO Player Pro and keep the screen showing the MAC address and Device Key open. In other words, they identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
In the app, or on the IBO Player Pro playlist page after entering the MAC address and Device Key, add a playlist: choose Xtream Codes for a username, password and server URL, or M3U for one complete link. Name it IPTVOID.
Reload the app
Back on the TV, choose Reload or close and reopen the app, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. The app is free to register; however, its activation (paid in the app to its developer) is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
ELK Player setup guide Paid
What you need: The ELK Player app, a phone or computer for the ELK website, as well as the complete M3U link from your activation message.
Install ELK Player
On a Samsung or LG TV, open the TV’s app store, then search for ELK Player and install it if your model and region are supported. On iPhone, iPad or Apple TV, open the ELK Player App Store listing and check the developer ELKPLAYER LTD.
Note the MAC address on screen
Open ELK Player. The first screen shows the app’s MAC address (some versions also show a device key). Keep that screen open, because these identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
On a phone or computer, open the ELK Player playlist page and enter the MAC address shown on your screen. Then name the playlist IPTVOID, paste the complete M3U link and choose Add List. The website takes an M3U playlist link.
Reload the app
Back on the TV or device, choose Reload or close and reopen ELK Player, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. ELK Player runs free for 7 days; after that its developer asks for a one-time activation fee per device, paid on the ELK website with your MAC address. That fee is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Android TV / TV box setup guide
TiviMate setup guide Recommended Free · paid upgrade
What you need: An Android TV / Google TV or compatible Fire OS device, as well as the connection details supplied by IPTVOID.
Install TiviMate
Open Google Play on your TV and search for TiviMate IPTV Player by Armobsoft FZE, or use the official Google Play listing. Install only if the store says it is compatible with your device.
Add a playlist
Open TiviMate, then start adding a playlist. Afterwards, choose the connection type in your activation message: Xtream Codes, M3U or a provider-registered Stalker portal.
Match the fields to your connection type
For Xtream Codes only:
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
M3U: paste the full supplied playlist URL into the playlist field. Portal: enter only the portal URL supplied after IPTVOID registers the device/app ID. Do not guess a portal address from an ordinary server URL.
Finish the playlist prompts
Follow the app’s on-screen prompts to finish, then wait for the channel list. If IPTVOID supplied a separate EPG URL, add it as the programme-guide source; it is not a second playlist.
Open the programme guide
Select your IPTVOID playlist and a live channel. Then use the player’s guide to browse programmes. Also, movie and series features depend on the player edition and the account supplied.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
IBO Player Pro setup guide Second option Paid
What you need: The app installed on your TV or box, as well as the IPTVOID connection details from your activation message.
Install IBO Player Pro
Open your device’s app store (Samsung Apps, LG Content Store or Google Play), then search for IBO Player Pro and install it if your model and region are supported. On Fire TV, use the Downloader steps in the Fire TV guide with the download address on the IBO Player Pro website. This is not the same app as IBO Player, because the two have separate websites and licences.
Find the MAC address and Device Key
Open IBO Player Pro and keep the screen showing the MAC address and Device Key open. In other words, they identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
In the app, or on the IBO Player Pro playlist page after entering the MAC address and Device Key, add a playlist: choose Xtream Codes for a username, password and server URL, or M3U for one complete link. Name it IPTVOID.
Reload the app
Back on the TV, choose Reload or close and reopen the app, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. The app is free to register; however, its activation (paid in the app to its developer) is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
Smarters Pro setup guide Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Open Google Play on your device and use the Android / Android TV store link from the Smarters Pro developer’s website. Check that the developer is Tech Smarters and that the store lists your device as compatible.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
IBO Player Paid
What you need: The IBO Player app on your TV, a phone or computer for the IBO website, as well as your IPTVOID login details.
Install the correct IBO Player
On your Android TV, open Google Play, search for IBO Player and install it if your model and region are supported. This guide is for the version that shows iboplayer.com inside the app.
Find the two codes on your screen
Open IBO Player, then keep the screen showing the MAC / Device ID and Device Key open. These identify this installation of the player; in other words, they are not your IPTVOID username and password.
Add your IPTV account from a phone or computer
Open the IBO Player manage-playlist portal. Enter the Device ID and Device Key shown on your TV, then log in. Choose Add XC Playlist if shown; XC means the username/password/server login.
Use the server address in your own activation message. If you were given an M3U link, use the portal’s M3U / playlist-URL option instead.
Save and refresh the TV app
Save the playlist on the website. Then return to the TV and choose Reload or Change Playlist if offered, or close and reopen IBO Player. Select the IPTVOID playlist you added.
Open your channels
Allow the playlist to load, then open the live-channel, movie or series section available for your account.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the app asks for a player licence, check the player account separately. However, if IPTVOID rejects your login, contact IPTVOID support instead.
Google TV / Nvidia Shield setup guide
TiviMate setup guide Recommended Free · paid upgrade
What you need: An Android TV / Google TV or compatible Fire OS device, as well as the connection details supplied by IPTVOID.
Install TiviMate
Open Google Play on your TV and search for TiviMate IPTV Player by Armobsoft FZE, or use the official Google Play listing. Install only if the store says it is compatible with your device.
Add a playlist
Open TiviMate, then start adding a playlist. Afterwards, choose the connection type in your activation message: Xtream Codes, M3U or a provider-registered Stalker portal.
Match the fields to your connection type
For Xtream Codes only:
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
M3U: paste the full supplied playlist URL into the playlist field. Portal: enter only the portal URL supplied after IPTVOID registers the device/app ID. Do not guess a portal address from an ordinary server URL.
Finish the playlist prompts
Follow the app’s on-screen prompts to finish, then wait for the channel list. If IPTVOID supplied a separate EPG URL, add it as the programme-guide source; it is not a second playlist.
Open the programme guide
Select your IPTVOID playlist and a live channel. Then use the player’s guide to browse programmes. Also, movie and series features depend on the player edition and the account supplied.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Smarters Pro setup guide Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Open Google Play on your device and use the Android / Android TV store link from the Smarters Pro developer’s website. Check that the developer is Tech Smarters and that the store lists your device as compatible.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Android phone / tablet setup guide
Smarters Pro setup guide Recommended Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Open Google Play on your device and use the Android / Android TV store link from the Smarters Pro developer’s website. Check that the developer is Tech Smarters and that the store lists your device as compatible.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Apple TV setup guide
UHF setup guide Recommended Free · paid upgrade
What you need: An iPhone, iPad or Apple TV with the App Store, as well as the connection details from your activation message.
Install UHF
Open the UHF App Store listing and choose Get. Check the developer name Short Wavelength Applications SL. On Apple TV, install the same app from the tvOS App Store.
Add a playlist
Open UHF, then choose to add a playlist. Pick Xtream Codes if your activation message has a username, password and server URL; pick M3U if it has one complete playlist link. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
For M3U, paste the whole link into the playlist field. Do not split it into the fields above.
Save and let the list load
Save the playlist and wait for the channels and the guide to finish loading; keep the app open while it loads.
Start watching
Open the IPTVOID playlist, then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the guide can take a few minutes to fill the first time. UHF’s PRO plan is paid to its developer and is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
ELK Player setup guide Paid
What you need: The ELK Player app, a phone or computer for the ELK website, as well as the complete M3U link from your activation message.
Install ELK Player
On a Samsung or LG TV, open the TV’s app store, then search for ELK Player and install it if your model and region are supported. On iPhone, iPad or Apple TV, open the ELK Player App Store listing and check the developer ELKPLAYER LTD.
Note the MAC address on screen
Open ELK Player. The first screen shows the app’s MAC address (some versions also show a device key). Keep that screen open, because these identify this installation, not your IPTVOID account.
Add your IPTVOID playlist
On a phone or computer, open the ELK Player playlist page and enter the MAC address shown on your screen. Then name the playlist IPTVOID, paste the complete M3U link and choose Add List. The website takes an M3U playlist link.
Reload the app
Back on the TV or device, choose Reload or close and reopen ELK Player, then select the IPTVOID playlist.
Start watching
Choose Live TV, Movies or Series. ELK Player runs free for 7 days; after that its developer asks for a one-time activation fee per device, paid on the ELK website with your MAC address. That fee is separate from IPTVOID.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Smarters Pro setup guide Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
On Apple TV, open the App Store and find Smarters Pro by Tech Smarters Private Limited. The official listing identifies its Apple TV compatibility. Install it if your tvOS version is supported.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Windows PC setup guide
Smarters Pro setup guide Recommended Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Visit the Smarters Pro developer’s website, choose its Windows download and run the downloaded installer. The current desktop release is labelled Beta; test your account before relying on it.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Mac setup guide
Smarters Pro setup guide Recommended Free
What you need: The Smarters Pro app from the developer’s official link, as well as the three login details from your activation message.
Install Smarters Pro
Visit the Smarters Pro developer’s website and choose the macOS download for your system. The current desktop release is labelled Beta. Follow macOS’s normal installation prompts; do not bypass a security warning.
Open the IPTV login screen
Open the player, then choose the option to add a playlist or account. Select Xtream Codes / XC when offered. This means “log in with the three details from IPTVOID”. However, labels can vary by app version.
Enter your IPTVOID details
- Playlist / profile name
- Type
IPTVOID, for example. This is just a name you choose. - Username
- The IPTV username in your activation message; in other words, usually not your email address.
- Password
- The IPTV password in that same message. However, this is not your website or app-store password.
- Server / host URL
- The server web address supplied for this account. Also keep
http://orhttps://and any port number exactly as supplied.
If your activation message contains only an M3U URL, select the M3U / playlist-link option instead and paste the whole link. Do not split it into the fields above.
Save and let the list load
Choose the app’s login, add or save button. Then wait for the account’s channel list to finish loading; keep the app open while it loads.
Start watching
Open your saved IPTVOID profile. Then choose Live TV, Movies or Series if that section is included in your account. Meanwhile, the programme guide may take longer to populate.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
Formuler setup guide
Formuler MYTVOnline Recommended Built in
What you need: A supported Formuler box with MYTVOnline and the login method named in your activation message.
Open the built-in player
Use MYTVOnline, supplied on supported Formuler boxes. You do not need to install a different player for this guide.
Open your version’s connection settings
- MYTVOnline 2: Menu → Connections.
- MYTVOnline 3: Menu → Content Manager → Content Sources.
- MYTVOnline 4: Menu → Settings → App Settings → Content Sources.
Add a portal for an XC or registered-MAC connection, or add a playlist for an M3U link.
Use the login method IPTVOID supplied
- Xtream Codes / XC
- Name: IPTVOID. URL: the supplied server/portal address. Enable “Login required?” if shown, then enter your IPTV username and password.
- Registered MAC / portal
- First give IPTVOID the MAC-ID displayed inside MYTVOnline’s Add Portal screen. Enter the exact portal URL IPTVOID supplies. Leave username and password blank unless your supplied login method says otherwise.
- M3U playlist
- Paste the complete M3U URL into the playlist field. Put any separate EPG URL in the programme-guide field.
Save and connect
Choose the save/connect option and wait for the content source to load. For a registered-MAC connection, the correct MAC-ID must be registered for an active account first.
Choose a channel
Open the connected content source and browse its TV guide. Movies and series appear when supported by your connection and account. See also Formuler’s official connection guide.
If it doesn’t work
- Check the connection details required by your chosen login method, then copy them exactly and remove spaces at the beginning or end.
- Use the login method supplied for your account, because a complete M3U link does not belong in the Server URL field.
- Close and reopen the player, then check that another app can connect to the internet.
- Confirm that your IPTVOID account is active, since some orders need manual intervention and may take up to 12 hours to activate.
- If the error remains, contact support with your device, app name and error message. However, do not post your password publicly.
MAG box setup guide
MAG portal connection Built in
What you need: Your box’s MAC address registered with IPTVOID and the portal URL from your activation message.
Confirm your MAG model and portal account
This guide is for MAG Linux boxes with a Servers → Portals menu. Have IPTVOID register the box’s MAC address and supply its portal URL first. MAG Android models such as MAG425A use an app instead; these menus do not apply.
Open the portal settings
On the box, open Settings → System settings → Servers → Portals.
Enter the supplied portal
- Portal 1 name
- IPTVOID
- Portal 1 URL
- The exact portal URL supplied for your registered box. Do not add /c, change the protocol, or guess an address.
Your ordinary website password or an M3U link is not a portal URL.
Save and restart the portal
Save the settings, leave this menu and choose System settings → Restart Portal. If a provider login screen appears, use only the login details IPTVOID supplied.
Open the TV section
Allow the provider’s menu to load, then choose TV or the available content category. Menu names depend on the portal.
If it doesn’t work
- Ask IPTVOID to confirm that the exact MAC address for this box is registered.
- Copy the supplied portal URL exactly, including its protocol and any port or path.
- Confirm that your account is active. Some orders need manual intervention and may take up to 12 hours.
- Check your internet connection, then restart the portal once.
- If you see an authorisation error, send support your model and error message. Do not factory-reset the box.
STB Emu (Android app) setup guide
StbEmu Recommended Free · paid upgrade
What you need: An Android TV or Android phone with Google Play, and the portal URL IPTVOID sends after registering the app’s MAC address.
Install StbEmu
On Android TV or an Android phone, open Google Play and search for StbEmu (Free) or StbEmu (Pro) by M Vasilchuk; check the app name before installing.
Open the profile settings
Open StbEmu. Open its menu (double-tap the screen, or move the cursor to the top edge with the remote), then Settings → Profiles. Open the default profile or add a new one and name it IPTVOID.
Send IPTVOID the MAC address
In the profile, open STB configuration and note the MAC address; it usually starts with 00:1A:79. Send it to IPTVOID support with the email you ordered with, so the portal can be registered to it. Do not change the MAC afterwards; a new MAC needs a new registration.
Enter the portal URL
Back in the profile, open Portal settings and type the portal URL exactly as IPTVOID sent it, including http:// or https://. Leave the STB model and firmware at their defaults unless support says otherwise.
Reload and watch
Go back to the main screen and choose Reload portal, or close and reopen the app. The provider menu loads and the channel list appears; the first load can take a minute. If the screen says the device is not registered, wait for IPTVOID’s confirmation and reload again.
If it doesn’t work
- Ask IPTVOID to confirm that the exact MAC address for this box is registered.
- Copy the supplied portal URL exactly, including its protocol and any port or path.
- Confirm that your account is active. Some orders need manual intervention and may take up to 12 hours.
- Check your internet connection, then restart the portal once.
- If you see an authorisation error, send support your model and error message. Do not reinstall the app; a reinstall can change the MAC.
Roku setup guide
Other device or app setup guide
Common setup questions
Where do I find my server URL?
Look in your IPTVOID activation email or message, alongside the IPTV username and password. It is the web address for your account. If it is missing, ask support to resend the connection details; do not copy a server from another customer or an old screenshot. If an address stops working, use the latest one IPTVOID sent you or ask support for it.
Do I use my email and website password?
Usually not. A player needs the IPTV username and IPTV password supplied in your activation message. Your website login, Apple ID, Google password and player-licence account are separate.
What do Xtream Codes, M3U and portal mean?
Xtream Codes / XC uses three fields: server URL, username and password. M3U uses one complete playlist link. A portal uses a provider address and often a registered device ID. Use the method IPTVOID supplied. DNS is sometimes used informally to mean the server address; you do not need to change your router’s DNS to follow these guides.
My login says invalid. What should I check?
Check all three login fields and remove leading/trailing spaces. Keep the URL’s protocol and port exactly as supplied. Confirm that the account has activated and has not expired. Some orders need manual intervention and may take up to 12 hours. If it still fails, send support the app name and exact error.
Where do I enter an M3U URL or EPG link?
Choose the player’s M3U / playlist URL option and paste the whole M3U link. An EPG is the programme guide; enter a separately supplied EPG link only in the EPG/guide field. Keep playlist links private because they can contain your login details.
The player opens but channels do not load.
Close and reopen it, check your internet connection, and confirm that your account is active. If you already use a VPN, compare playback with your normal VPN setting and with it temporarily disconnected where appropriate. Do not buy a VPN or change servers at random; ask IPTVOID about a supported alternative if needed.
Does paying for the player pay for IPTVOID?
No. A player is the application used to open your account. Its licence or Premium upgrade is separate from IPTVOID’s service. IBO’s player trial is also separate from IPTVOID’s free trial.
Which app should I use on Samsung, LG or iPhone?
Use the Samsung or LG guide for the IBO Player route (ELK Player and IBO Player Pro are alternatives), subject to your model’s app store. Use the iPhone / iPad guide for UHF or the exact Smarters Pro App Store link. Similar app names do not always share the same login portal.
The picture buffers or freezes.
First check that another app on the same device streams smoothly; if it does not, the connection is the cause (try a wired connection or move closer to the router). If other apps are fine, close the player and reopen it, and try a different channel. Lower the stream quality in the player if it has that setting. If one channel keeps freezing while others play, report that channel to support with its name.
The app installed but says it is not activated.
Activation belongs to the app, not to IPTVOID: paid players (IBO Player, IBO Player Pro, ELK Player, UHF PRO, TiviMate Premium) need their own licence from their developer after the trial period. Your IPTVOID login keeps working in any activated app. If the app is activated and still refuses the login, see “My login says invalid” above.